SMA INVERTER MANAGER Instructions D'installation page 20

5 LCS tool
5.2.2 Changing the Grid Code
Figure 5.11 LCS tool - entering the SMA Grid Guard code
To reset the Inverter Manager after the first ten operating
hours and to select a new country data set, use your
SMA Grid Guard code under the user group Installer
(see certificate "Order form for the SMA Grid Guard code"
at www.SMA-Solar.com).
Procedure:
1. Open the LCS tool.
2. Log in as an Installer.
3. Call up the menu Service.
4. Enter your SMA Grid Guard code in the field
Individual access code under Grid Guard.
5. Select [Save] to save the changes.
☑ A new menu item General is available under the
menu Setup.
20 IMVIOBOX-IA-xx-12
SMA Solar Technology AG / SMA Solar Technology America LLC
Installation Manual