Fumes Evacuation System - Palazzetti ECOMONOBLOCCO WT F Série Notice D'installation

5.6

Fumes evacuation system

The appliance must be connected to a system for flue gas evacuation suitable to ensure an adequate dispersion into the
atmosphere of the combustion products, in compliance with standards EN 1856-1-2 , EN 1857, EN 1443, , EN 13384-1-3,
EN 12391-1, UNI 10683 both for size and materials used in its construction.
The size of the chimney must comply with the specifications in the Technical sheet (12 Pa medium draft with closed door).
The components of the systems for the evacuation of combustion products must be declared suitable for the specific operating
conditions and provided with marking (through the declaration or the certificate of conformity or the European Technical
Approval of the product).
The section of the flue will remain constant for the whole of its height.
A minimum height of 3,5÷4 m is recommended (Fig. 5.6a).
Fig. 5.6a
2 m
0,4 m
It is appropriate to provide a collection chamber with inspection for solid materials and any condensation under the smoke
inlet channel (Fig. 5.6b).
Fig. 5.6b
Product images are purely indicative
cod. 004777520 - 21/03/2019 - Palazzetti - PN - Italy 31