Safety; General Information; Danger Symbols Used In This Operating Instruction; Personnel Qualifications - Wilo SiFire EN Série Notice De Montage Et De Mise En Service

Installation and operating instructions

1 General information

About this document
The language of the original operating instruc-
tions is English. All other languages of these
instructions are translations of the original oper-
ating instructions.
These installation and operating instructions are
an integral part of the product. They must be kept
readily available at the place where the product is
installed. Strict adherence to these instructions is
a precondition for the proper use and correct
operation of the product.
These installation and operating instructions cor-
respond to the relevant version of the product and
the underlying safety standards valid at the time
of going to print.
EC-Declaration of conformity:
A copy of the EC-Declaration of conformity is a
component of these operating instructions.
If a technical modification is made on the designs
named there without our agreement or the decla-
rations made in the installation and operating
instructions on product/personnel safety are not

2 Safety

observed, this declaration loses its validity.
These operating instructions contain basic infor-
mation which must be adhered to during installa-
tion, operation and maintenance. For this reason,
these operating instructions must, without fail, be
read by the service technician and the responsible
specialist/operator before installation and com-
missioning.
It is not only the general safety instructions listed
under the main point "safety" that must be
adhered to but also the special safety instructions
with danger symbols included under the following
main points.
2.1 Danger symbols used in this operating
instruction
Symbols:
General danger symbol
Danger due to electrical voltage
Danger due to suspended loads
Danger due to inflammable materials
Risk of electrification
Risk of poisoning
Danger due to hot surfaces
Danger due to hot products
Risk of cuts
Installation and operating instructions Wilo-SiFire System
Risk of Fall
Risk of irritation
Risk of pollution
Risk of explosion
General ban symbol
No access for unauthorised persons!
Do not touch live parts!
Smoking and
open fire prohibited!
NOTE: ...
Signals:
DANGER!
Acutely dangerous situation.
Non-observance results in death or the most
serious of injuries.
WARNING!
The user can suffer (serious) injuries. "WARN-
ING" implies that (serious) injury to persons is
probable if this information is disregarded.
CAUTION!
There is a risk of damaging the product/unit.
"CAUTION" implies that damage to the product
is likely if this information is disregarded
NOTE:
Useful information on handling the product. It
draws attention to possible problems.
Information that appears directly on the product,
such as
• Direction of rotation arrow,
• Identifiers for connections,
• Name plate,
• Warning sticker
must be strictly complied with and kept in legible
condition.

2.2 Personnel qualifications

The installation, operating, and maintenance per-
sonnel must have the appropriate qualifications
for this work. Area of responsibility, terms of ref-
erence and monitoring of the personnel are to be
ensured by the operator. If the personnel are not in
possession of the necessary knowledge, they are
to be trained and instructed. This can be accom-
plished if necessary by the manufacturer of the
product at the request of the operator.
English
29