Factory Settings - Sartorius Stedim Biotech Microsart e.motion Mode D'emploi

Factory Settings

Adjusting the Movement Sensor
To automatically dispense membrane filters, the
movement sensor for identifying an approaching
tweezers can be set at different ranges.
Low Range Setting
Use a screwdriver to turn the potentiometer on the
t
back panel of the dispenser clockwise.
> Now, bring the forceps closer to the separator slit
to trigger the automatic feed mechanism.
High Range Setting
Use a screwdriver to turn the potentiometer on the
t
back panel of the dispenser counterclockwise.
> The automatic feed mechanism is now triggered
when the forceps are at a further distance from
the separator slit.
Factory Setting 13