Vitalmaxx Z 09992 Mode D'emploi page 29

8. Lever the tensioning tool towards the jumping mat (see arrow) so that a new loop is
produced between the frame and tensioning tool into which the sphere can slide.
DANGER OF CRUSHING! Never try to pull the sphere by hand through the
loop!
1
9. Remove the tool from the sphere. The sphere is now fi tted in the correct position.
A
B
The instructions continue on the next page! Please turn over.
2
B
A
A
29
3
NOTE: The sphere can only slip into
the tab, when the hook of the tensi-
oning tool is positioned in between
the loop (see picture).
10. .After tensioning the loops with the
yellow spheres (A), start tensioning
the loops with the blue spheres (B)
as illustrated in the picture.
B
EN