Mounting The Motor; Mounting The Landing Gear - Reely Furious 3D Notice D'emploi

o) Mounting the Motor
Figure 16 shows a schematic of all three motor mounting options. Mount the motor in the fuselage tip depending on motor type. Then install the intended
propeller.
We recommend that everything is checked for proper function before installing the motor and speed controller.
p) Mounting the Landing Gear
Separate the rubber hose 20 x 1.4 mm (figure 1, item 11) in four equal parts. Install the wheels as shown in figure 17.
Push the assembled landing gear into the landing gear holder already glued into the fuselage (see construction section "Mounting the Lower Wing in the
Fuselage") and secure it with two screws from the linkage parts set.
42
Figure 16
Figure 17