Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
q) Mounting the Receiver
Connect all servos to the assigned receiver outputs of the intended receiver according to the requirements of the operating instructions of your remote control.
Practical advice:
For a model like the "Furious 3D", we recommend use of a state-of-the-art 2.4 GHz computer remote control system with mixing functions. In any
case, you are able to set every servo individually for the servo path and control progression.
Once you have checked the function of the connected servos and the speed controller, attach the receiver in the area of the fuselage opening with double-sided
tape or servo tape. Also observe the information in the chapter "Model Commissioning".
43
Publicité
Chapitres
Table des Matières
