Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
Suspected malfunctions, are often due to causes that the user can fix themselves.
Therefore check the product using this section. In most cases the problem can be solved quickly.
Only perform the steps described within these instructions!
All further inspection, maintenance and repair work must be performed by an authorized service
center or a similarly qualified specialist if you cannot solve the problem yourself!
Problem
1.Product does
not start
2. Product does
not reach full
power
3. Unsatisfactory
result
Possible Cause
1.1 Battery pack not properly
attached
1.2 Battery pack discharged
1.3 Battery pack damaged
1.4 Other electrical defect to
the product
2.1 Battery pack capacity
too low
2.2 Air vents are blocked
3.1 Cutting device worn
Solution
1.1 Attach properly
1.2 Remove and charge battery pack
1.3 Check by a specialist electrician
1.4 Check by a specialist electrician
2.1 Charge battery pack
2.2 Clean the air vents
3.1 Replace with a new one
25
Publicité
Chapitres
Table des Matières
Dépannage
