Battery Pack; Charger Maintenance - LawnMaster CLGT6014A Mode D'emploi

Masquer les pouces Voir aussi pour CLGT6014A:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MAINTENANCE
■ Wipe off the housing and the plastic components using a damp, soft cloth. Do not use strong
solvents or detergents on the plastic housing or plastic components. Certain household cleaners
may cause damage, and may cause a shock hazard.

BATTERY PACK

Store the battery pack fully charged.
Recharge the battery pack whenever there is less power. Do not allow the battery pack to become
completely discharged.
Do not recharge a battery pack that is already fully charged. Overcharging shortens battery life.
Once the battery is fully charged, remove the battery from the charger and disconnect charger
from the outlet.
Do not store the battery pack on the tool or in the charger.
Recharge the battery at a temperature of between 45 and 104 ˚F (7 - 40 ˚C). If the battery pack
is hot, allow it to cool down before recharging.

CHARGER MAINTENANCE

Keep the charger clean and clear of debris. Do not allow foreign material to get into the recessed
cavity or onto the contacts. Wipe the charger clean with a dry cloth. Do not use solvents or water,
and do not place the charger in wet conditions.
■ Unplug the charger when there is no battery pack in it.
■ Fully charge the batteries before placing them in storage. Do not recharge a fully charged battery pack.
■ Overcharging will shorten battery life.
■ Recharge the battery pack whenever there is less power. Do not allow the batteries to become
completely discharged.
■ Store the charger at normal room temperature. Do not store it in excessive heat. Do not use the
charger in direct sunlight. Recharge at room temperature between 45 and 104 ˚F (7 - 40 ˚C).
If the battery pack is hot, allow it to cool down before recharging.
24

Publicité

Chapitres

Table des Matières
loading

Table des Matières