Responsibilities, Organizational Measures; Responsibilities Of The Operator; Responsibilities Of The Personnel - Mettler Toledo InFlow 76X Instructions D'utilisation

12
© 04/17 Mettler-Toledo GmbH, CH-8606 Greifensee
Printed in Switzerland
2.8

Responsibilities, organizational measures

2.8.1 Responsibilities of the operator

– The operator must restrict permission to work with InFlow 76X flow-through housings to
persons who are familiar with the basic requirements of work safety and accident prevention,
and who have been instructed in the handling of the flow-through housing. This instruction
manual serves as the basic document.
– In addition to the instruction manual there are also generally applicable legal and other
binding regulations for work safety and accident prevention as well as for environmental
protection, and these must be provided by the operator and instructed to personnel using
the flow-through housings.
– The operator/user must periodically check that the personnel is fully aware of regulations on
safety and risk prevention.
– Measures must be taken to ensure that the flow-through housings are only operated in a safe
and fully functional condition.
– If the flow-through housings are employed in hazardous areas, compliance with prevailing
regulations must be ensured.
CAUTION
Before the flow-through housing is put into operation, the operator has to make sure
that use of the flow-through housing in conjunction with the other associated equipment and
resources is fully authorized.

2.8.2 Responsibilities of the personnel

– All persons operating the flow-through housings must have read Chapters 1 "Introduction"
and 2 "Safety" as well as the warning notices in this instruction manual.
– In addition to the instruction manual, generally applicable legal and other binding
regulations for work safety and accident prevention must be adhered to.
– Avoid any kind of working that is doubtful from a safety perspective or which exceeds the
admissible scope of use.
– Do not use high-pressure cleaning equipment for polymer/plastic components (of the flow-
through housing).
NOTICE
Before every startup, the flow-through housing must be checked for:
– damage to the connections, fastenings, etc.
– leakage
– proper functioning
– authorization for use in conjunction with other plant equipment and resources.
DANGER
Defective flow-through housings must neither be installed nor put into operation. Leakage and
inappropriate installation may lead to the escape of medium or to pressure surges (explosion),
potentially harmful both to persons and to the environment.
InFlow 76X
InFlow 76X
52 403 711