Modifications - Mettler Toledo InFlow 76X Instructions D'utilisation

InFlow 76X
InFlow 76X
52 403 711
NOTICE
The operator is responsible for the instruction of personnel. Additional copies of this instruction
manual can be ordered from the equipment supplier. As an integral part of the flow-through
housing, this instruction manual must at all times be readily accessible to users at the point
of operation of the flow-through housing. The operator must inform the supplier/manufacturer
of the insertion housing immediately about any safety-relevant incidents, or observations
made, during use of the housing.
DANGER
Incorrect manipulation and/or instruction errors can lead to potential hazards for persons and
for the environment.
NOTICE
Before every startup, the insertion housing must be checked for:
– damage to the connections, fastenings, etc.
– leakage
– defective cables and lines etc.
– authorization for use of the housing in conjunction with the associated plant resources.
DANGER
Defective flow-through housings must neither be installed nor put into operation. Leakage
and inappropriate installation may lead to the escape of medium and cause a potential threat
to life (including the risk of explosion).

2.13 Modifications

NOTICE
No attachments or modifications to the flow-through housings are allowed.
DANGER
The manufacturer/supplier accepts no responsibility for any damage caused by
unauthorized attachments and alterations or for the incorporation of spare parts which are
not of METTLER TOLEDO provenance. The risk is borne entirely by the operator.
© 04/17 Mettler-Toledo GmbH, CH-8606 Greifensee
17
Printed in Switzerland