Product Information
Intended use of the equipment
Technical specification
The contents of this publication can be changed without prior notice.
This publication contains information which is protected by copyright laws. No part of this publication may be reproduced,
stored in a system for information retrieval or be transmitted in any form, in any matter without Munters' written consent.
Please send any comments regarding the content of this publication to:
Munters Europe AB, Technical Publications Department, PO Box 434, SE-191 24 Sollentuna, Sweden
6
The M9L dehumidifier with air cooled condenser is used to efficiently dehumidify
the air in rooms where the humid air can not be transported away via ducting. The
desiccant dehumidifier picks up the humidity in the ambient/process air, the wet
air is then passing through a condenser using the ambient air as a coolant. The
condensed water is discharged through a drain pipe. The total power used by the
dehumidification process is returned as heat to the room.
The M9L dehumidifiers are designed and manufactured by an EN-ISO 9001
accredited development and manufacturing organization. The unit conforms to
Product Directives and European standards that are listed in the EC Declaration of
Conformity which is supplied with each unit.
Technical Data for:
D
RY AIR
Rated air flow (m³/h)
Availble static pressure (Pa)
1)
Fan motor power (W)
C
ONDENSER COOLING AIR
Rated air flow (m³/h)
R
EACTIVATION AIR
Heater power (W)
Temperature increase across heater (°C)
Fan motor power (W)
D
ESICCANT SYSTEM
Type of rotor (desiccant)
Drive motor (W)
M
ISCELLANEOUS DATA
Total power (W)
Mains voltage (V) 1-phase, 50Hz
Rated current (A)
Operating temperature (°C)
IEC protective class (IP)
Outer dimensions WxDxH (mm)
Weight (kg)
Noise level unducted (dBA)
Drying capacity (kg/24h at 20°C and 60% RH)
1)
Common fan motor dry air and condenser cooling air
2)
High Performance SilicaGel
3)
436 including the fixed connecting piece for dry air
M9L Dehumidifiers
Quantity
120
-
92
140
840
95
60
2)
HPS
3,5
1005
230
4,4
+0 to +25°C
33
3)
256x390
x535
20
60
9
190TML
-
1040
-
A04.05