cascade corporation G Série Instructions D'installation page 7

I
NSTALLATION
4
Flush hydraulic supply hoses
A
Install hoses as shown.
B
Operate auxiliary valves for 30 sec.
C
Remove union fittings.
D
Connect hoses to clamp fittings as
shown in Step 3 above.
5
Check oil level and remove
rubber vent cover
28G (Current Models)
Remove
vent
cover.
Oil level must
be up to
fill plug hole
(2 places).
6038011-R4 EN
RR0514.eps
Oil level must
be up to
fill plug hole.
120G, 140G
RR1003.eps
Remove rubber
vent cover.
28G (Earlier Models),
36G-77G
Oil level must
be up to
fill plug hole.
NOTE: If necessary, fill gearbox with Cascade
Gear Lube 656300 or equivalent SAE 90 wt.
gear lube (AGMA 'mild' 6EP Gear Oil).
RR0547.eps
Remove rubber
vent cover.
5