cascade corporation G Série Instructions D'installation page 11

I
NSTALLATION
12
Cycle Revolving Clamp functions
• With no load, cycle CLAMP and ROTATE
functions several times.
• Check functions for operation in accordance with
ISO (ANSI) standards.
• Clamp and rotate a maximum load, check for
equal arm movement and normal rotation.
• Check for leaks at fittings, revolving connection
and cylinders.
ROTATE (Driver's view)
A
Counterclockwise (CCW)
B
Clockwise (CW)
B
AUXILIARY VALVE FUNCTIONS
Check for compliance with
ISO (ANSI) standards:
6038011-R4 EN
WARNING: Make sure all personnel
are clear of the clamp during testing.
CLAMP
C
D
A
CL2722.eps
C
D
GA0005.eps
Release Arms
Clamp Arms
CL2723.eps
A
C
Tilt Forward
Hoist Down
C
A
B D
Hoist Up
Tilt Back
WARNING: Truck control handle and
attachment function activation shown
here conforms to ASME/ANSI B56.1
recommended practices. Failure
to follow these practices may lead
to serious bodily injury or property
damage. End user, dealer and OEMs
should review any deviation from the
practices for safe operation.
SOLENOID ADAPTION
A
Counterclockwise (CCW)
A
Release Arms
(press knob button)
B
Clockwise (CW)
B
Clamp Arms
(press knob button)
B
B
A
A
CL2480.eps
9