Installation; Usage - Marmitek MegaView 60 Guide Utilisateur

Installation

HD Settop box
HDMI
Blu-ray player
1
MediaCenter PC
In order to ensure that the system is working properly you are advised to check the set-
up with short CAT-5e/6 cable lengths first.
1. Switch off all appliances before you start connecting.
2. Connect the HDMI source (HD-DVD player, Blu-ray disc player, HD set-top box,
game console, etc.) to the MegaView 60 transmitter [1], using an HDMI cable (not
provided).
3. Connect the MegaView 60 receiver to the appliance shown [2] (e.g. HDTV or
projector), using an HDMI cable (not provided).
4. Use two CAT5e/6 Ethernet cables to connect the MegaView 60 transmitter with
the MegaView 60 receiver [3&4].
*The RJ45 plug on these cables must be connected according to EIA/TIA T568B
standard, see attachment page xx.
Make sure that the CAT5e/6 cable and the transmitter and receiver connections
(CAT5e-1 en CAT5e-2) correspond to one another.
5. Connect the power adapter [5] to the 'DC/5V' connection on the MegaView 60
receiver (HDMI Receiver) and plug the adapter into a socket.
6.1

Usage

1. Switch on the HDMI source (e.g. HD set-top box or multi media PC).
2. Switch on the display device (for instance HDTV or projector) and select the
appropriate input. Usually you will do this by pressing the A/V or EXT button of
your remote control.
3. You will receive images from the connected A/V device immediately.
MegaView 60™
HD TRANSMITTER
HDMI EXTENDER OVER CAT5e/6 | 1080p
5
CAT5e-2
3 & 4
HD RECEIVER
CAT5e-1
HDMI EXTENDER OVER CAT5e/6 | 1080p
HDMI
HDTV
2
5