Leica SF 64 Mode D'emploi page 55

Changing the batteries
The batteries are drained or spent when the flash
recycle time (time from triggering the flash at full light
capacity, e.g. at M, to the flash readiness display
lighting up again) exceeds 60s. The battery warning
display also appears in the touch display.
1. Switch off the flash unit; to do so, press the
button until all displays go out
2. Slide the battery compartment cover
open up
3. Insert the batteries lengthways according to the
symbols and close the battery compartment
cover
down and
7
Caution:
When inserting the batteries make sure that the
polarity is correct in line with the symbols in the
battery compartment. Incorrect polarity can destroy
the device! There is a risk of explosion if the batteries
are used incorrectly. Always replace batteries with the
same, high-quality types from a single manufacturer
with the same capacity!
Important:
Used batteries do not belong in domestic garbage!
Help to protect the environment and take used
batteries to the appropriate collection points!
EN
55