Unold 68846 Notice D'utilisation page 36

8. Leave sufficient space between the appliance and walls and other flammable
objects such as curtains.
9. Plug the power cord of the appliance into an electrical outlet (220–240 V ~
AC). Switch the ON/OFF switch to „ON".
10. Place the function selector switch on top and bottom heat and set the tem-
perature on both temperature regulators to 230°C. Turn the timer to 15 min-
utes. Press the „Start/Stop" button to switch the appliance on.
11. Open the window during this burn-in phase. After pre-heating the appliance
there may already be visible traces of use; however, these do not affect the
function of the appliance and do not constitute grounds for a complaint.
12. Switch off the appliance by switching the ON/OFF switch to „OFF" and pull
out the mains plug.
13. Allow the appliance to cool completely.
14. Now your appliance is ready for use.
CAUTION!
The appliance becomes very hot during operation, also on the outer
surfaces.
36