Handling Compact Discs - Clarion DB245 Mode D'emploi

5. HANDLING COMPACT DISCS

This unit has been designed specifically for
playback of compact discs bearing the
mark. No other discs can be played.
To remove the compact disc from its storage
case, press down on the center of the case
and lift the disc out, holding it carefully by the
edges.
Removing the disc
Always handle the compact disc by the edges.
Never touch the surface.
To remove fingermarks and dust, use a soft
cloth, and wipe in a straight line from the cen-
ter of the compact disc to the circumference.
New discs may have some roughness around
the edges. The unit may not work or the sound
may skip if such discs are used. Use a ball-point
pen, etc. to remove roughness from the edge of
the disc.
Ball-point pen
Roughness
Note:
• Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These may
get caught in the internal mechanism and damage the disc.
6
DB245
Proper way to hold
the compact disc
No
Note on Compact Discs
Never stick labels on the surface of the com-
pact disc or mark the surface with a pencil or
pen.
No
Do not use any solvents such as commercially
available cleaners, anti-static spray, or thinner
to clean compact discs.
No
Do not use compact discs that have large
scratches, are misshapen, or cracked, etc. Use
of such discs will cause misoperation or damage.
No
Do not expose compact discs to direct sunlight
or any heat source.
No