Mounting; Adhesive Mounting - Abus RWM450 Manuel D'utilisation Et D'installation

Radio group or common radio group
alarm
• Alarm stops
• Signals are not forwarded to other
units
If the signal has already been forward-
ed:
on the originating device
• Alarm is silenced on all connec-
ted devices
the forwarding alarms:
• Alarm is silenced on all forwarding
devices
• Alarm on originating device continues
to sound
• An easy way to locate the originating

MOUNTING

The smoke alarm unit is held in place
by a magnetic holder attached to the
mounting site. Please note that the
magnetic holder only has a strong
attractive force from one direction.
The magnetic holder may be mounted
either by an adhesive fixing or by
drilled holes:
any

1. Adhesive Mounting

1.1 Adhesive mounting of magnetic
carrier, self-adhesive coated in
accordance with EN14604:2005/
AC:2008
The sole use of this self-adhesive
fastener produces a
• very maintenance-friendly
• firm
• magnetic connection of the device
on one of
• The alarm unit can be removed by
gently pulling downwards from the
magnetic holder e.g. for inspection,
maintenance or cleaning. For this
adhesive mounting, only the
adhesive supplied may be used.
– 52 –
to the installation site.