Wait approx. 10 seconds until 2nd beep:
Beep
Beeps on all alarms in the common
radio group but not in the
other radio groups!
This test should be performed regularly,
every 3-6 months, to check the
common radio group.
Connection Test between
a Radio Group and the
Common Radio Group
e. g. Ground Floor
radio group
Press and hold approx. 20
seconds Hold down on this
alarm until 3rd beep (do not
release earlier!)
Beep
10 seconds
1x
3x
– 49 –
1st beep: Test on this device:
2nd beep: Test of connection to radio
group – no beep on the
other alarms in the radio
group
3rd beep: Test of Connection to Com-
mon Radio Group:
1 x beep on all alarms in the
common radio group
Please note:
This test must be performed
separately for each alarm con-
nected to the common radio
group. This test should be per-
formed regularly, every 3 – 6
months, to check the connec-
tion to the common radio group.
Alarm Forwarding/Alarm Stop
Example: To forward an alarm within
radio range
• Unit issues alarm due to
smoke or temperature
GB