Network Setup - Abus RWM450 Manuel D'utilisation Et D'installation

Beep 1 x
LED
1 second
short yellow pulse (lights
Signal:
Testing in progress,
Meaning:
please wait!
LED 1 x red
No other RISA yet found as
Meaning:
started up. Once the red
LED goes out, continue as
follows to network other
units to this RISA:

Network setup

Setting up other RISAs; Connection
Mode and creating a Radio Group
• When setting up the network always
ensure to link each additional alarm
to the master.
• Set up each additional RISA in a posi-
On the master already set up:
1. Press black activation pin into marked
opening and hold until LED lights
yellow
2. Pull back activation pin, then:
LED
1 second
short yellow pulse (lights
Signal:
Testing in progress,
Meaning:
please wait !
LED
green steady signal
Signal:
Meaning: Master function is now on
– 42 –
3 seconds