Dmx Controller - Nicols BIRDY WASH 122 Manuel D'utilisation

movement to each other, even if you have two units only.

4.2 DMX Controller

By using a universal DMX controller to control the units, you will need to set DMX address
from 1 to 512 so that the units can receive DMX signal.
Press the MENU button up to when the DMX Address is showing on the display. Pressing
ENTER button and the display will blink. Use DOWN and UP button to change the DMX512
address. Once the address has been selected, press the ENTER button to setup, to go back
to the functions without any change press the MENU button again. Hold and press the
MENU button about one second or wait for one minute to exit the menu mode.
Please refer to the following diagram to address your DMX512 channel for the first 4 units：
Channel mode
9channels
12channels
28channels
Unit 1 Unit 2
Address Address
1
1
1
30B
Unit 3
Address
10 19
13 25
29 57
Unit 4
Address
28
37
85