Silk-n Tightra Mode D'emploi page 5

Do not operate the device in environ-
U
ments where there is a risk of explosion.
Keep the device and all its parts away
from open flames and hot surfaces.
Keep the adapter accessible at all times,
U
so it can be removed from the electricity
supply easily in case of emergency.
Disconnect the device from the electricity
U
supply after charging.
Never pull the adapter out of the socket
U
by the cable. Always remove it by taking
hold of the adapter.
Place the adapter cable in such a way that
U
it does not pose a tripping hazard.
Do not use if the parts or accessories
U
are not supplied by the manufacturer as
defined in this manual, or if the device
is damaged or does not appear to be
working properly. In such cases contact
Customer Service.
Ensure there are no unintended rough
U
surfaces, sharp edges or protrusions
which may cause harm before each use.
3
EN