Silk-n Tightra Mode D'emploi page 20

9.3 External mode treatment
Before use, the skin should be shaven, clean, dry and free of any
powders, antiperspirants or deodorants. Also, be sure that the
EN
skin is not red or inflamed.
1. Apply a small amount of the gel supplied with the device
to the 3 silver-coloured electrodes (#5, #6). There is no
need to apply gel internally.
To start external mode treatments, long press the control
2.
button (#3) and then short press it 3 times. The treatment
mode indicator light (#2) will be constant white. The
device is now ready for use.
3. Lie down and make yourself comfortable.
4. Hold the base of the device and place the 3 silver-coloured
electrodes (#5, #6) on the labia. The triangular shape of the
side with the silver-coloured electrodes (#5, #6) will help
you position the device correctly.
When the electrodes (#5, #6) are in good contact with
a
the skin, and you are moving the device, you will feel
heat emitted from the electrodes (#5, #6). Keep moving
the device slowly but firmly across the skin. If there is no
movement, the Bi-Polar RF energy will not work.
18