Safety With Silk'n Tightra - Silk-n Tightra Mode D'emploi

3. Safety with Silk'n Tightra

With Silk'n safety comes first. Silk'n Tightra has these safety
features:
U
Heat stabilizer: To prevent overheating, each of the 16
electrodes (#5, #6) has a built-in heat stabilizer. When
a rise in the treated skin temperature is detected, the
stabilizer automatically stops emitting heat, until the skin
temperature lowers enough for the stabilizer to resume
heating.
U
Touch sensor: The touch sensor ensures that the RF
Energy will only pass through the electrodes (#5, #6) when
the electrodes (#5, #6) are in good contact with the skin.
U
Movement sensor: When you use the device in external
mode, the device will only emit energy when you move
the device across the skin.
U
Auto shutdown: This safety feature is activated in one of
3 situations:
You have completed a 20 minute treatment session.
y
You will feel 1 vibration.
The device has not had firm contact with the skin for
y
more than 2 minutes. You will feel 1 vibration.
The battery is too low to complete your 20 minute
y
treatment session.
9
EN