Get Started; Before Treatment - Silk-n Tightra Mode D'emploi

9. Get started!

9.1 Before treatment

EN
U
Make sure the device battery is not low (see section 4.4
Device charging).
U
Empty the bladder before treatment.
U
Check that the gel expiry date has not passed.
U
Remove the protective cover (#7) that is over the
electrodes (#5, #6) before use.
U
Before use, clean the electrodes (#5, #6) with a vaginal
wipe, and dry with a clean paper towel.
U
Never use flammable liquids such as alcohol (including
perfumes, sanitizers, or other applications containing
alcohol), or acetone to clean the skin before use.
U
Remove all piercing or metal from the treatment area
before use.
9.2 Internal mode treatment
1. Apply a small amount of the gel supplied with the device
to all the electrodes (#5, #6). There is no need to apply gel
internally.
2. Start internal mode treatments using the low energy
setting. Long press the control button (#3) once. You will
feel a vibration, and the device is now ready for use.
During the treatment, you will feel a vibration approximately
a
once a minute.
3. Lie down and make yourself comfortable.
16