Pelgrim IDK5104 Notice D'utilisation page 99

OPERATION
• Touch the timer button to activate the timer of this zone.
A light indicates the cooking zone to which the timer is or can be
linked.
• Touch the timer button again to set the time (0-99 min.).
▷ Touch the - button to go to 60 minutes immediately.
▷ You can touch and hold the timer button or the - button to set
the desired time faster.
▷ You can change the remaining cooking time at any moment
during preparation by selecting the timer and using the timer
button and - button. Make sure the correct zone is activated (dot
indication) before you touch the timer button.
• When the set cooking time has elapsed, the zone switches off and
you will hear a beep signal. You can switch the beep off at the end
of the cooking time by touching the timer button.
▷ The timer automatically stops blinking and beeping after
2 minutes.
Using the timer as a standard kitchen timer
• Touch the On/Off button.
The display for each cooking zone will show '0.'.
• Touch the timer button to activate the timer.
• Touch the timer button again to set the time (0-99 min.).
▷ Touch the - button to go to 60 minutes immediately.
▷ You can touch and hold the timer button or the - button to set
the desired time faster.
▷ You can change the remaining time at any moment by selecting
the timer and using the timer button and - button.
• When the time you have set has elapsed, you will hear a beep
signal. You can switch the beep off at the end of the time by
touching the timer button.
▷ The timer automatically stops blinking and beeping after
2 minutes.
Turning off the standard kitchen timer
• Touch the timer button to activate the timer.
• Touch simultaneously the timer button and the - button.
In the display '00.' appears and the kitchen timer is switched off.
GB 15