Display Indications And Symbols - VOLTCRAFT VC-890 Mode D'emploi

8. DISPLAY INDICATIONS AND SYMBOLS

The symbols and indications vary depending on the model. This is a list of all possible symbols and
indications in the VC890 series.
AUTO
TrueRMS
> <
< >
OL
OFF
AC
VOID
DC
mV
Delta symbol for relative measurement (= reference measurement)
Stands for "automatic measuring range selection"
True RMS measurement
Data hold function
Comparison mode
Limiting value specification, measurement must remain between two specified
values
Limiting value specification, measurement must remain outside of two specified
values
Stands for "comparison test not passed"
Stands for "comparison test passed"
View saved data
Overload = the measuring range has been exceeded
Switch position "OFF"
Symbol for battery replacement (battery charge low)
Symbol for the diode test
Symbol for the acoustic continuity tester
Alternating voltage or current
Maximum measurement
Minimum measurement
Average measurement
Automatic power off activated
Data memory will be deleted
Manual data memory
Automatic data memory
Symbol for data transfer (active interface)
Function switch activated (blue button labelling)
Data memory contains no values
Direct voltage or current
Millivolt (=0.001 V)
55