Scope Of Delivery; Display Indications And Symbols - VOLTCRAFT AT-200 Notice D'emploi

Scope of Delivery

Multimeter with protection rubber frame
Compound 9V battery
K-type thermosensor (up to max. 200°C)
Multipurpose plug for the K-type thermosensor
Safety measuring wires red and black
Safety alligator clips
Inductive speed meter
Operating Instructions

Display Indications and Symbols

HOLD
REL
Auto
OL
BAT
AC
DC
V
A
Hz
Ω
F
°C
%
n
µ
m
k
M
28
stands for data hold; the measuring value is kept (e.g. for the
record) until the "HOLD" button is pressed anew or the multi-
meter is switched off.
stands for the relative value measurement (=reference measu-
rement)
stands for "automatic measuring range selection"
stands for overload = overload, the measuring range has been
exceeded
battery replacement symbol; please replace the batteries
immediately to avoid measuring errors!
symbol for the diode test
symbol for the acoustic continuity tester
alternating size for voltage and current
direct size for voltage and current
volt (unit of electric potential)
ampere (unit of electric current)
hertz (unit of frequency)
ohm (unit of electric resistance)
farad (unit of capacity)
grade centigree (unit of temperature)
indication of the duty cycle of a signal in %
nano (exp.–9)
micro (exp.–6)
mill (exp.-3)
kilo (exp.3)
mega (exp.6)