Self test program
The test program will test pan/tilt movement and colors.
1. Press the MENU button until "TEST" is displayed, press ENTER.
2. The fixture will now run a self test. Press MENU to exit.
Reset
1. Press the MENU button until "Reset" is displayed. Press the ENTER button and the unit will reset itself.
Offset Menu:
To enter the offset adjustment submenu, press the ENTER button for at least 5 seconds. In this submenu you are
able to adjust the original position of the pan, tilt, gobo wheel, and color wheel.
Adjustment of the Pan position
1. Press the ENTER button for at least 5 seconds, then press the UP or DOWN buttons so that "PAN" is displayed,
press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the MENU
button for one second to exit.
Adjustment of the Tilt position
1. Press the ENTER button for at least 5 seconds, then press the UP or DOWN buttons so that "TILT" is displayed,
press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the MENU
button for one second to exit.
Adjustment of the color wheel
1. Press the ENTER button for at least 5 seconds, then press the UP or DOWN buttons so that "COLR is displayed,
press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm. Press the MENU
button for one second to exit.
DMX CONTROL
This function allows you to use a universal DMX-512 controller to control the master dimmer, rotation and color. A
DMX controller allows you to create unique programs tailored to your individual needs.
©Copyright LOTRONIC 2015
SHOOTER-LED
Page 8