Staufenbiel Hyperion HSF0314092E Instructions De Montage page 17

11
12
13
14
ARF VERSION ONLY:
Use sandpaper to lightly sand the surface
were the servos will be installed. Remove any
dirt.
ARF VERSION ONLY:
Glue the servotray with CA glue in the ope-
ning.
ARF VERSION ONLY:
Secure the servo in the mount using the screws
provided with the servo.
Connect the clevis. Cut the servo horn that
you can use a flat cover.
ARF VERSION ONLY:
Screw the aileron control horn in the existing
thread. Cut a small notch as shown making
the aileron flex the full angle down.
EN
17