Staufenbiel Hyperion HSF0314092E Instructions De Montage page 14

EN
Congratulations on purchasing the Staufenbiel Hyperion, a full-composite thermal glider.
The construction of the model and the detailed solutions related subject to a certain taste dependency.
Therefore, the solutions to these instructions are to be understood as a suggestion. There are certainly
other options and approaches. In some alternatives is therefore received during the building specifica-
tions, but does not shown on the pictures.
01
02
14
PREFACE
THE FUSELAGE
ARF VERSION ONLY:
Glue in the rudder horn like shown in the pic-
ture with 5-min Epoxy or UHU Endfest 300.
ARF VERSION ONLY:
Glue in the servo tray under the wing and
screw the servos into the tray. The linkage for
the elevator can be mounted in the inner hole
of the servo horn. The linkage from the rud-
der should be mounted more in the outer hole
(depending on the servo).