Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8.
maintenance, trOubleshOOting
8.1.
safety instructions
Warning!
Risk of injury from improper maintenance!
• Maintenance may be carried out by authorized technicians only
and with the appropriate tools!
Risk of injury from unintentional activation of the system and
an uncontrolled restart!
• Secure system from unintentional activation.
• Following maintenance, ensure a controlled restart.
8.2.
malfunctions
If malfunctions occur, check:
→
the line connectors,
→
the operating pressure,
→
the power supply and valve control.
If the valve still does not switch, please contact your Bürkert Service.
10. transpOrt, stOrage, dispOsal
note!
Transport damages!
Inadequately protected equipment may be damaged during
transport.
• During transportation protect the device against wet and dirt in
shock-resistant packaging.
• Avoid exceeding or dropping below the allowable storage
temperature.
Incorrect storage may damage the device.
• Store the device in a dry and dust-free location!
• Storage temperature: -40 - 80 °C.
Damage to the environment caused by device components
contaminated with media.
• Observe applicable regulations on disposal and the environment.
9.
spare parts
Caution!
Risk of injury and/or damage by the use of incorrect parts!
Incorrect accessories and unsuitable spare parts may cause injuries
and damage the device and the surrounding area.
• Use only original accessories and original spare parts from Bürkert.
Nut
Coil
Fitting
Coil and fitting can be ordered
complete by quoting the iden-
tification number of the device
(see type label).
Wearing part set on request.
Publicité
Table des Matières
