Control Panel - Baxi LUNA DUO-TEC 60 GA Notice D'installation

9.5 Control Panel

Press and hold for 1 second, to display information as shown
in the table below.
Press to exit.
DESCRIPTION
00 Secondary fault internal code
01 Heating flow temperature (°F/°C)
02
Outdoor temperature (°F/°C)
03 Indirect Tank DHW temperature (boiler CH only)
Domestic hot water temperature (boiler with plate
04
exchanger)
05 Water pressure in heating system (PSI/bar)
06 Heating return temperature (°F/°C)
07 Thermo fuse status (000/001)
08
Not used
BUTTONS Key
DHW temperature adjustment
(+ to increase the temperature and – to decrease it)
Heating water temperature adjustment
(+ to increase the temperature and – to decrease it)
Boiler operating information
Operating mode:
DHW – DHW & Heating – Heating Only
Off – Reset – Exit menu/functions
SYMBOL Key
Off: heating and DHW disabled (only boiler frost
protection is active)
Ignition fault
Boiler/system water pressure low
Call a qualified service technician
Manual reset fault (
Fault in progress
240012485 REV A [12/30/2018]
10/11
)
42
DESCRIPTION
09 Set-point Central Heating (°F/°C)
Manufacturing information
12
Flue sensor temperature (°F/°C)
13 Manufacturing information
14 Identification Open Therm communication
15 Manufacturing information
16 Manufacturing information
17 Fan speed ("i17"x100)
18
Manufacturing information
Burner lit
DHW operating mode enabled
Heating mode enabled
Programming menu
Boiler information menu
Set unit of measurement (SI/US)