Cycle Control - Auto Or Manual - Webstaurant Store 3299720 Manuel D'utilisation Et D'installation

You can choose to control the cycle in automatic mode (AUTO) or by means of operator choice, timed or
using the probe in the core (MANUAL).
The default cycle control setting is automatic mode (AUTO).
1. Select MENU by rotating the knob
2. Press the knob to enter section MENU
3. Select SETTING by rotating the knob
4. Press the knob to enter section
SETTING
5. Select CYCLE CONTROL by rotating
the knob
6. Press the knob to enter section CYCLE
CONTROL
7. Select the desired type of cycle control
8. Press the knob to confirm
3299720 /160555_GB

CYCLE CONTROL - AUTO OR MANUAL

SOFT +37°F SOFT 0°F
HARD +37°F HARD 0°F
IFR INFINITY
MENU
SOFT +37°F SOFT 0°F
HARD +37°F HARD 0°F
IFR INFINITY
MENU
AUTOMATIC FUNCTIONS
STORED HACCP
MENU
MULTY SETTING
COOLING SERVICE
AUTOMATIC FUNCTIONS
STORED HACCP
MENU
MULTY SETTING
COOLING SERVICE
LANGUAGE
SET DATE/CLOCK
MENU
SECTOR
SETS
MULTY
CYCLE CONTROL
LANGUAGE
SET DATE/CLOCK
MENU
SECTOR
SETS
MULTY
CYCLE CONTROL
AUTO
MENU
SETS
MANUAL
AUTO/MANU
AUTO
MENU
SETS
MANUAL
AUTO/MANU
54