Thawing - Webstaurant Store 3299720 Manuel D'utilisation Et D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The defrost cycles with probe or by time are automatic. During the cycle the parameters can be modified and
the temperature can be selected or the time at which the food should be defrosted and ready for use.
In the event of time defrosting the operator can decide to change only the cycle end date acting on the date
on the screen of the cycle in progress. This action is valid only if you are in the first phase (preservation)
1. Select MENU by rotating the knob
2. Press the knob to enter section MENU
3. Select FUNCTIONS by rotating the knob
4. Press the knob to enter section
FUNCTIONS
5. Select THAWING by rotating the knob
6. Press the knob to enter into the

THAWING

7. Rotate the knob to select the type most
suited for the product to be treated
8. Press the knob to activate the selected
cycle
In case of time defrosting the cycle will begin
immediately with the date and time values
set by the manufacturer.
-
Once the cycle has been started (time
defrosting) the cycle end date and time can
be changed, but only during the first phase
(preservation).
3299720 /160555_GB
THAWING
SOFT +37°F
HARD +37°F
IFR
MENU
SOFT +37°F
HARD +37°F
IFR
MENU
AUTOMATIC
FUNCTIONS
STORED
HACCP
MULTY
SETTING
COOLING
SERVICE
AUTOMATIC
FUNCTIONS
STORED
HACCP
MULTY
SETTING
COOLING
SERVICE
DEFROST
SANITATION
STORAGE
THAWING
PROVING
PROBE HEATING
DEFROST
SANITATION
STORAGE
THAWING
PROVING
PROBE HEATING
ICE CREAM TIME
ICE CREAM PROBE
TIME
PROBE
ICE CREAM TIME
ICE CREAM PROBE
TIME
PROBE
02/10/2013 17:28
12:56
100%
SET
STOP
34
SOFT 0°F
HARD 0°F
INFINITY
SOFT 0°F
HARD 0°F
INFINITY
MENU
MENU
MENU
FUNCTIONS
MENU
FUNCTIONS
THAWING
THAWING
+80°F
+75°F

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

160555

Table des Matières