If the modifications are saved the user will be
asked to assign a name to the cycle. use the knob
to enter the name and press
To make a cycle a favorite, select MAKE
FAVORITE, found at the end of the parameters
list, and enter the desired position. The cycle will
automatically overwrite the one in that position.
Save by selecting
9. Cycle ended, automatic conservation
phase
During conservation it is possible:
- View, modify the default parameters and make
it a favorite by selecting SET
- to activate a manual defrost by selecting
- to stop the cycle by selecting STOP
Note: the modified parameters can be saved once
the new value is inserted by selecting
otherwise, by selecting
be active only for the cycle in progress.
If the modifications are saved the user will be
asked to assign a name to the cycle. use the knob
to enter the name and press
If not required, manual defrosting is not performed
3299720 /160555_GB
to save it.
the modifications will
to save it.
STOR. +37°F
90'
CICLO 3
100%
SET
STOP
SOFT PHASE TIME
60'
SOFT PHASE FAN
70%
STORAGE
39°F
_
MAKE FAVORITE
STOR. +37°F
- -
END CYCLE
CONSERVE
100%
SET
STOP
28
+80°F
+75°F
+80°F
+75°F