If not required, the function will not be activated and the display will alternate between showing the defrosting
and the message "NOT REQUIRED", accompanied by the sound of the buzzer.
symbol
1. Select MENU by rotating the knob
2. Press the knob to enter section MENU
3. Select FUNCTIONS by rotating the knob
4. Press the knob to enter section
FUNCTIONS
5. Select DEFROST by rotating the knob
6. Press the knob to activate the selected
cycle
During the cycle it is possible
- to view and modify the default parameters by
selecting SET (see page 40)
-
to stop the cycle by selecting STOP
Note: the modified parameters will be saved only
for the cycle in progress
7. Cycle ended
FUNCTIONS
DEFROST
SOFT +37°F
HARD +37°F
IFR
MENU
SOFT +37°F
HARD +37°F
IFR
MENU
AUTOMATIC
FUNCTIONS
STORED
HACCP
MULTY
SETTING
COOLING
SERVICE
AUTOMATIC
FUNCTIONS
STORED
HACCP
MULTY
SETTING
COOLING
SERVICE
DEFROST
SANITATION
STORAGE
THAWING
PROVING
PROBE HEATING
DEFROST
SANITATION
STORAGE
THAWING
PROVING
PROBE HEATING
20'
- -
SET
END CYCLE
- -
CONSERVE
- -
SET
31
SOFT 0°F
HARD 0°F
INFINITY
SOFT 0°F
HARD 0°F
INFINITY
MENU
MENU
MENU
FUNCTIONS
MENU
FUNCTIONS
- -
- -
STOP
- -
- -
STOP
3299720 /160555_GB