Machine Loading; Position Of Trays; Core Probe - Webstaurant Store 3299720 Manuel D'utilisation Et D'installation

Do not pile up foodstuffs to be cooled. Thickness should be lower than 2" in
negative quick cooling and lower than 3" in positive quick cooling.
Make sure air circulation is not hampered between food trays.
The grid-holding frame (included in those models which include
trolleys) is to be located at the centre of the cabinet.
Place the trays as close to the evaporator as possible.
If the cabinet is not full place the trays at equal distance from one another.
For proper position of the probe, refer to the following pictures.
S O N D A A S IN G O L O
SINGLE-DETECTOR
R IL E VA M E N T O
PROBE

MACHINE LOADING

POSITION OF TRAYS

CORE PROBE

PRODUCT CORE
C U O R E P R O D O T TO
15
S O N D A A M U LTIP L O
MULTI-DETECTOR
R IL E VA M E N TO
PROBE
0,19"-0,79"
PRODUCT SURFACE
S U P E R FI C I E P R O D O T TO
3299720 /160555_GB