Cooling - Webstaurant Store 3299720 Manuel D'utilisation Et D'installation

It is advisable to run a cooling cycle prior to selecting any chilling cycle.
1. Select MENU by rotating the knob
2. Press the knob to enter section MENU
3. Select COOLING by rotating the knob
4. Press the knob to activate the selected
cycle
During the cycle it is possible:
- to view and modify the default parameters by
selecting SET (see page 40)
- to stop the cycle by selecting STOP
Note: the modified parameters will be saved only
for the cycle in progress
5. Cycle ended, automatic conservation
phase
During conservation it is possible:
- to view and modify the default parameters by
selecting SET (see page 40)
- to stop the cycle by selecting STOP
Note: the modified parameters will be saved only
for the cycle in progress
3299720 /160555_GB

COOLING

SOFT +37°F
HARD +37°F
IFR
MENU
SOFT +37°F
HARD +37°F
IFR
MENU
AUTOMATIC FUNCTIONS
STORED HACCP
MULTY SETTING
COOLING SERVICE
AUTOMATIC FUNCTIONS
STORED HACCP
MULTY SETTING
COOLING SERVICE
- -
COOLING
100%
SET STOP
END CYCLE
- -
CONSERVE
100%
SET STOP
30
SOFT 0°F
HARD 0°F
INFINITY
SOFT 0°F
HARD 0°F
INFINITY
MENU
MENU
+80°F
+75°F
+80°F
+75°F