Webstaurant Store 3299720 Manuel D'utilisation Et D'installation page 37

Rotate the knob to select the date and time
-
- Press the knob to enter the date and time
value change mode
Select the new value by rotating the knob
-
- Press the knob to confirm the new value
and move to the next one
- Select to confirm and exit from the
function
During the cycle it is possible:
- to view and modify the default parameters by
selecting SET (see page 40)
- to stop the cycle by selecting STOP
Note: the modified parameters will be saved only
for the cycle in progress.
If the times are changed the cycle end will
automatically be recalculated.
9. Cycle ended, automatic conservation
phase
During conservation it is possible:
- to view and modify the default parameters by
selecting SET (see page 40)
- to activate a manual defrost by selecting
- to stop the cycle by selecting STOP
Note: the modified parameters will be saved only
for the cycle in progress
If not required, manual defrosting is not performed.
02/10/2013 17:28
05:59
100%
SET STOP
02/10/2013 17:28
05:59
100%
SET STOP
17 : 28
PROVING
02 OTT 2013
17 : 28
PROVING
02 OTT 2013
20 : 28
PROVING
02 OTT 2013
02/10/2013 20:28
05:59
100%
SET STOP
- -
END CYCLE
CONSERVE
100%
SET STOP
37
+80°F
+75°F
+80°F
+75°F
+80°F
+75°F
+80°F
+75°F
3299720 /160555_GB