Warranty Exclusions; Description Of The Machine - breviglieri super master Manuel D'utilisation Et D'entretien

The purchaser shall only be able to exercise his rights in relation to the warranty when he has complied with the conditions gover-
ning warranty performance, as indicated in the supply contract.

1.2.1 WARRANTY EXCLUSIONS

(Besides the circumstances indicated in the supply contract) the warranty becomes void:
▪ When the damage can be ascribed to insufficient maintenance.
When, following repairs made by the user without the Manufacturer's consent or owing to the installation of spurious spare
▪
parts, the machine has been subjected to changes and the damage is ascribable to these changes.
▪ When the machine has been hitched to tractors whose power rating exceeds the value given in the "Technical Specifica-
tions" table in this manual.
▪ When the user has failed to comply with the instructions in this manual. Damage deriving from negligence, carelessness,
bad and improper use of the machine or incorrect manoeuvres by the operator are also excluded from the warranty. Remo-
val of the safety devices with which the machine is equipped shall automatically void the warranty and relieve the Manufac-
turer from all relative liability. The warranty also becomes void if spurious spare parts are used.
Even when covered by the warranty, the machine must be returned Carriage Free.

1.3 DESCRIPTION OF THE MACHINE

The SUPER MASTER cutter bears «CE» marking in compliance with the European Union standards described in directive 98/37/EC
and successive modifications, as stated in the declaration of conformity with which each machine is equipped.
1. Frame
2. Transmission unit
3. Casing
4. Cowling
5. Three-point drawbar
6. Driveline hook
7. Bearing stand
8. Parallelogram
9. Frame guards
10. Levelling roller
11. Pivoting ram
12. Shifting ram
13. Top link pin
14. Parallel hitch pin
15. Transport pin
16. Pivot linkage
17. Swinging hitch
18. Hammer
19. Knife
20. Identification plate
super master
Fig. 1
- 20 -
20