Overall Dimensions; Materials In Contact With The Additive; Installation; Introduction - ETATRON D.S. eOne MF 0110 Notice D'installation, Mode D'emploi, Notice D'entretien

The values shown are with a tolerance of + / - 5%, and relate to a series of tests carried out on similar equipment with
water at a temperature of 20 ° C.

Overall dimensions

Materials in contact with the additive

In the standard configu ration the pumps of the "eOne" series are supplied with the following materials:
Pump
Head
PVDF

INSTALLATION

Introduction

This section describes the steps for installing the pump, the pipes, and the electrical wiring. Read these
instructions carefully before beginning any activity.
Follow these guidelines when installing the pump.
ENGLISH
38
Fig. 1 - Pump and plate for wall mounting (dimensions in mm.)
Membrane
PTFE
Ensure that the pump and all related equipment is turned off before starting work.
•
Seals Valves
CERAMIC
TFE/P
TFE/P
Connections Pipes
PVDF PE / PVC
Pump
Casing
PP