Train Pet - Petsafe Passport MPA19-13800 Guide D'installation

5o.
Insert finishing plugs into
screw holes on interior and
exterior frames. Align flat
edge of plugs with outer
edges of frame. Plugs will
only fit one direction.
5P.
Plug power adaptor into
connector on underside of
interior frame. Route power
adaptor wire through
wire guides in desired
direction towards nearest
power outlet.
Optional:
Apply caulk (silicone
adhesive) around exterior frame
and in between tunnels, where
tunnels meet, for improved
weather resistance.
Optional
To avoid tripping, always position the power cord out of the path of foot traffic.
Do not allow your pet to chew on the power cord.
Only use designated power adaptor with the product. Do not use power adaptor in
temperatures below 32° F (0° C) or above 104° F (40° C). Power adaptor for indoor
use only.
SteP 6

train Pet

See Passport door/flap Operating Guide for training instructions and tips.
™
16
5o
5P
www.petsafe.net