Train Your Pet; Closing Panel - Petsafe PPA11-14766 Manuel D'installation

5B. Close the sliding glass door against the Sliding Glass Pet Door.
Clean and dry the back edge of the sliding glass door. Position the
glass sweep at the top glass edge with the flexible part touching the
glass of the stationary door. Carefully peel away the backing and
press the glass sweep in place as you move down to the bottom of
the glass. Trim any excess with scissors.
5C. Open the sliding glass door. Clean and dry the
front edge of the sliding glass door. Position
the weather stripping at the top front edge
toward the interior side. Carefully peel away
the backing and press the weather stripping
into place as you move down to the bottom of
the door. Trim any excess with scissors.
Step 6

Train Your Pet

6A. It may help for you to be on one side of the door and your pet
on the other. Lift the flap a few inches and try to talk your pet
through the door. After your pet has gone through a few times,
allow the flap to touch your pet's back so they will become
comfortable using the pet door. If your pet will not go through
the door, tape the flap open until they use it on their own.
Helpful Tip: Try treats to encourage your pet to go through the
pet door and become comfortable using it.

Closing Panel

The Closing Panel slides in the track on the interior (or exterior) of the
Sliding Glass Pet Door. It is useful during inclement weather or to keep
your pet from using the pet door.
5C
www.petsafe.net
5B
6A
11