Petsafe Passport MPA19-13800 Guide D'installation page 13

5G.
Before installing interior tunnel frame onto interior door frame, you need to determine which tunnel
position is needed for your wall thickness. Use the "Wall Entry Kit Tunnel Frame Guide" (Chart 1)
to determine this. Place interior tunnel frame (A-B) onto interior pet door frame (frame with flap) with
tabs in tunnel position listed in chart (Chart 1) for your wall thickness.
Chart 1
Passport
Wall thickness (t)
min max
3 ⁄ " 5 ⁄ "
3 1
4 8
(95 mm) (130 mm)
5 ⁄ " 5 ⁄ "
1 7
8 8
(130 mm) (149 mm)
5 ⁄ " 10 ⁄
7 7
8 16
(149 mm) (265 mm)
10 ⁄ " 1 1 ⁄ "
7 3
16 16
(265 mm) (284 mm)
1 1 ⁄ " 12"
3
16
(284 mm) (305 mm)
5G
5H.
Using a ⁄ " (5 mm) drill bit, drill through side holes located
3
16
inside interior tunnel frame through interior pet door frame.
Note: Small model doors have 2 holes and Medium model
doors have 4 holes.
From inside of tunnel, push to insert a tunnel fastener into
each hole you just drilled until head of fastener is flush with
tunnel side. Trim off any excess tunnel fastener using side-
cutting pliers.
Wall entry Kit tunnel frame Guide
™
tunnel frame(s) needed
Interior only (A-B)
Interior only (A-B)
" Interior (A-B) and Exterior (C-D)
Interior (A-B) and Exterior (C-D)
Interior (A-B) and Exterior (C-D)
Inner
Outer
www.petsafe.net
tunnel Position
Interior Tunnel in Inner Tunnel Slot
Interior Tunnel in Outer Tunnel Slot
Interior and Exterior Tunnel in Inner
Tunnel Slot
Interior Tunnel in Outer Tunnel Slot,
Exterior Tunnel in Inner Tunnel Slot
Interior Tunnel and Exterior Tunnel in
Outer Tunnel Slot
Inner Tunnel Slot
Tunnel
Tunnel
Outer Tunnel Slot
5H
13