Components; Tools Required - Petsafe Passport MPA19-13800 Guide D'installation

Components

Installation Guide
A Interior Tunnel Sides
(Small Qty 2,
Medium Qty 4*)
B Interior Tunnel
Top & Bottom
*Parts may be preassembled.
Note: The Passport Wall Entry Kit can be used for wall or applications 3
™
305 mm) thick.

tools required

Centre Locator Template
C Exterior Tunnel Sides
(Small Qty 2,
Medium Qty 4*)
D Exterior Tunnel
Top & Bottom
• Framing Square
• Hacksaw or screw cutter
• Jigsaw or other appropriate cutting device
to cut through wall
• Drill
•
1
• Phillips Screwdriver
• Slotted Screwdriver
• Tape Measure
• Masking Tape
• Duct Tape
• Pencil
• Level
• Scissors
• Stud Finder
• Side-cutting Pliers
• Safety Equipment
optional:
• Dry Wall Saw
• Caulk (Silicone Adhesive)
other Items you may need:
• Passport
• Sandpaper or metal file
www.petsafe.net
⁄ " to 12" (95 mm to
3
4
⁄ ", ⁄ ", ⁄ " (13 mm, 5 mm, 6 mm) Drill Bits
3 7
2 16 32
door/flap with instructions
™
Tunnel Fastners
(Small Qty 4,
Medium Qty 8)
Installation Screw Rods
with Nut (Qty 4)
Screw Binder
Post (Qty 4)
5