Covidien Edge E1455 Mode D'emploi page 2

en
Edge™

E1455 Insulated Blade
Electrode
2.75" (7.0 cm)

E1455-4 Insulated Blade
Electrode
4" (10.16 cm)

E1455-6 Insulated Blade
Electrode
6.5" (16.51 cm)

E1465 Insulated Needle
Electrode
2.8" (7.2 cm)

E1465-4 Insulated Needle
Electrode
4" (10.16 cm)

E1465-6 Insulated Needle
Electrode
6.5" (16.51 cm)
2
Not made with natural rubber latex
Do not use if package is opened or
damaged
For use with a max peak voltage of 5600 V.
Indications for Use
The Edge Coated Electrodes are intended as an
alternative to uncoated stainless steel
electrodes for use in conventional monopolar
electrosurgical accessories. The coated
electrodes are intended for use in situations
where monopolar electrosurgical cutting and
coagulation are normally used.
Warning
This product cannot be adequately cleaned
and/or sterilized by the user in order to
facilitate safe reuse, and is therefore
intended for single use. Attempts to clean or
sterilize these devices may result in bio-
incompatibility, infection, or product failure
risks to the patient.