Regulatory Marking; Explanation Of Regulatory Markings; Technical Features; Declaration Of Conformity - STAYER WELDING MIG/MAG Série Instructions D'emploi

DISPOSAL
We recommend subjecting all electric tools, accessories and
packaging to recycling respecting the environment.
For EU countries only:
Do not throw electric tools to the garbage! According
to European Directive 2012/19/UE on electric and
electronic devices, after transposition thereof into
national law, electric tools must be collected
separately so as to be subjected to ecologic
recycling.
Right to changes reserved.

6. Regulatory Marking

6.1 Explanation of regulatory markings

23
45
6 8
11
12
7 9
13
14 15
18
Pos. 1 Name and address of the manufacturer, distributor or
importer.
Pos. 2 Identification of the model.
Pos. 3 Model traceability.
Pos. 4 Symbol of the welding power source.
Pos. 5 Reference to regulation complied with by the equipment.
Pos. 6 Symbol for the welding process.
Pos. 7 Symbol for use in environments with increased risk of
electric shock.
Pos. 8 Symbol for the welding current.
Pos. 9 Nominal non-load output tension.
Pos. 10 Nominal output voltage and current range.
Pos. 11 Duty cycle of the power source.
Pos. 11a Duty cycle at 45%
Pos. 11b Duty cycle at 60%
Pos. 11b Duty cycle at 100%
Pos. 12 Nominal cut-off current (I2)
Pos. 12a Current value for 45% duty cycle
Pos. 12b Current value for 60% duty cycle
Pos. 12c Current value for 100% duty cycle
Pos.13 Load tension (U2)
Pos. 13a Load tension for 45 % duty cycle
Pos. 13b Load tension for 60 % duty cycle
Pos. 13c Load tension for 100 % duty cycle
Pos. 14 Symbol for power supply
Pos. 15 Nominal value of supply tension
Pos. 16 Maximum nominal supply current
Pos. 17 Maximum effective supply current
Pos. 18 IP degree of protection
1
10
11a 11b 11c
12a 12b 12c
13a 13b 13c
16 17
ENGLISH
32

6.2 Technical features

= tension input
= current input
= current output
%
= work cycle
ON
OFF
EN60974
-
= ground
= bobbin weight
= electrode diameter
= generator power
= dimensions
-

6.3 Declaration of Conformity

We declare under our exclusive responsibility, that the machines:
POWER SOURCES FOR WELDING, models:
MIG160Multi, MIG170Multi, MIG200Multi, MIG250BM,
MIG250BT, MIG350BT, MIG500BT satisfy all essential safety
and health requirements in conformity with regulations 2014/35/
EU, 2014/30/EU, 2011/65/EU, EN 60974-1, EN 60974-10
conforme a WEEE / RoHS.
January 2017
Ramiro de la Fuente
Director Manager
32