Spypoint BF-10HD Manuel D'utilisation page 8

14
Date and time: Enlarge the imprinted date and time on the
picture.
Protects your photo and video from the
Protect:
memory card.
Erase from the memory card, the photo or the
Erase one:
video seen on the screen.
Erase from the memory card, all stored
Erase all:
photos and videos, with the exception of
protected photos and videos.
Format memory card and erase all
Format:
protected photos and videos.
Return to the viewing screen.
Exit:
Note: The number of yellow stars that appear to the right of the
screen corresponds to the resolution of the photos.
=Low (3 MP)
=Medium (5 MP)
=High (10 MP)
• Watching on TV: You can view the photos or videos directly
from a TV. Connect the yellow end of the cable supplied into
the "VIDEO IN" of the TV and the other end into the "TV
OUT" of the camera. The options are the same as when viewing
on the screen 2.4"(see above).
SOUND RECORDING
This camera SPYPOINT
sound in "VIDEO" mode. When the "VIDEO" mode is selected,
the camera automatically records the sound. On the bottom of
the camera, you can find a rubber cap with the inscription MIC.
If the user does not want to record the sound, the rubber cap
needs to stay in place. If the sound recording is required, the
user must lift the rubber cap and turned it slightly so that the
microphone receiver is completely cleared (See figure below).
offers the possibility to record the
®
DOWNLOAD TO A COMPUTER
To transfer or view photos and videos on a PC, you must first
turn the camera "OFF" and connect the USB cable (supplied)
from the camera to your computer. The computer will recognize
the camera and install the software itself. Click on "My
Computer" and select "Removable Disk". Then click "DCIM"
and "100DSCIM" to find all your photos and videos.
Taking the SD card out of the camera and inserting it into the
computer port will achieve same results. If no SD slot is built
into the computer, a multi-card reader RD25-1 (sold separately)
must be used.
TROUBLESHOOTING
No person/animal on photos
1. Rising sun or sunset can trigger the sensor. Camera
must be re-orientated.
2. At night, motion detector may detect beyond range
of the IR illumination. Reduce distance setting.
3. Small animals may trigger the unit. Reduce distance
setting and/or raise height of camera.
4. Motion detector may sense animals through foliage.
5. If person/animal moves quickly, it may move out
of the camera's field of view before photo is taken.
Move camera further back or redirect camera.
Camera must be set on a stable and motionless
object i.e. large tree.
6. Make sure the mounting post or tree is stable and
does not move.
Red light in front of camera blinks
• Camera is set in TEST mode
• Camera is set in PHOTO or VIDEO mode. The red
light in front of the camera flashes for 60 seconds to
allow the user to leave without being photographed
or recorded.
15